Secure Print - Fuji Xerox DocuCentre-II 2055 User Manual

12 Job Status
Yes
Deletes the document.
Important • Once the document is deleted, it cannot be restored.
No
Cancels deleting the document.
When [Print] is Selected
1
Select what to do with the
document after printing.
Print and Delete
Starts printing the document. After printing, deletes the document.
12
Print and Save
Starts printing the document. After printing, the document remains undeleted.
Cancel
Cancels printing the document.
Print Quantity
Allows to specify the number of print.
Note

Secure Print

This section describes how to print or delete documents stored with the Secure Print
feature.
For information on secure print operations, refer to the print driver's help.
Note
For more information, refer to "Charge / Private Print Settings" (P.357).
1
Select [Secure Print].
2
Select the user to be checked, and
select [Document List].
Note
370
• When you select [Print and Save], the setting of [Print Quantity] is also saved.
• This feature is not displayed when the Private Charge Print feature is enabled by using one
of the following procedures::
- Select [Save in Private Charge Print] under [Receive Control].
- Select [According to Print Auditron] under [Receive Control], and then set [Job Login
Success] to [Save in Private Charge Print]. Under [Login Setup / Auditron Mode], select an
option other than [Off], and then set [Print Service] under [Auditron Mode] to [On].
• When you have selected [Save in Private Charge Print] or [Save in Charge Print] for
[Receive Control] under [Charge/Private Print Settings], jobs will not be saved in [Secure
Print] under [Stored Documents] even if you select [Secure Print] on the print driver.
• Select [Refresh] to display the
updated information.
• Select [ ] to return to the previous screen or [
• Entering a 3-digit billing ID with the numeric keypad specifies the user directly.
] to move to the next screen.