Kubota M6800S Workshop Manual page 302

M6800 · M6800S · M8200 · M9000, WSM
Toe-in
Viewing the front wheels from above reveals that the
distance between the toes of the front wheels is smaller
than that between the heels.
It is called toe-in.
outward due to the camber, but toe-in offsets it and
ensures parallel rolling of the wheels. Another purpose
of toe-in is to prevent excessive and uneven wear of
tires.
Toe-in
F : Front
6-M5
FRONT AXLE
The front wheels tend to roll
1 to 5 mm
2WD
0.04 to 0.20 in.
2 to 8 mm
4WD
0.08 to 0.32 in.
R : Rear
W1013242
KiSC issued 03, 2008 A