Air Cleaner Clogged Lamp; Model Only); Pto Clutch Lever Operation; Sensor - Kubota M6800S Workshop Manual

M6800 · M6800S · M8200 · M9000, WSM
[3] AIR CLEANER CLOGGED LAMP (FOR EURO AND OCEANIA MODEL
ONLY)

[4] PTO CLUTCH LEVER OPERATION

When the air cleaner is clogged and the negative
pressure of the suction air increases, the air cleaner
sensor (1) is turned ON, causing the current to flow from
the main switch and the lamp (2) is lighted.
(1) Air Cleaner Sensor
Air Cleaner Sensor
The micro switch (5) is normally opened. When the
air cleaner is clogged, the negative pressure is created in
the outlet port of air cleaner and the diaphragm (4) is
attracted. And the micro switch is turned on when the
negative pressure exceeds approx. 6.22 kPa (635
mmAq.).
(1) Filter
(2) Spring
(3) Guide
PTO clutch lamp inform an operator that PTO clutch
lever is engaged. This system consists of a PTO clutch
lamp on the panel board and a switch is operated by a
PTO clutch lever.
(1) PTO Clutch Lever
9-M27
ELECTRICAL SYSTEM

(2) Air Cleaner Clogged Lamp

W1027025
(4) Diaphragm
(5) Micro Switch
(6) Terminal
W1027285
(2) PTO Switch
W1016350
KiSC issued 03, 2008 A