Kubota M6800S Workshop Manual page 181

M6800 · M6800S · M8200 · M9000, WSM
Auxiliary Shift Lever [M8200 · M9000]
1. Remove the shift rod (3).
2. Remove the external circlip (2).
3. Take out the shift lever (1).
(1) Shift Lever
(2) External Circlip
Separating Transmission Case [M6800(S)]
1. Remove the transmission upper cover (1).
2. Remove the transmission case mounting screws and nut, and
separate the transmission case from the clutch housing.
(When reassembling)
• Apply liquid gasket (Three Bond 1216 or equivalent) to joint face
of the transmission case and clutch housing, transmission upper
cover and transmission case.
Transmission
case and clutch
housing screw,
nut
Tightening
torque
Transmission case and clutch
housing mounting stud bolt
Transmission upper cover
mounting screw
(1) Transmission Upper Cover
(2) Transmission Case Mounting Screw,
Nut
Separating Transmission Case [M8200 · M9000]
1. Check the clutch housing case and transmission case are
securely mounted on the disassembling stands.
2. Remove the transmission case mounting screws and nuts.
3. Separate the transmission case from the clutch housing.
(When reassembling)
• Apply liquid gasket (Three Bond 1216 or equivalent) to joint face
of transmission case and clutch housing case.
Transmission case and
Tightening torque clutch housing mounting
screw, nut
2-S16
(3) Shift Rod
103.0 to 117.7 N·m
M12, grade
10.5 to 12.0 kgf·m
11 nut
75.9 to 86.8 ft-lbs
77.5 to 90.2 N·m
M12, grade
7.9 to 9.2 kgf·m
7 screw
57.1 to 66.5 ft-lbs
M10, grade 60.8 to 70.6 N·m
9 screw, 6.2 to 7.2 kgf·m
nut (2) 44.8 to 52.1 ft-lbs
38.2 to 45.1 N·m
3.9 to 4.6 kgf·m
28.2 to 33.3 ft-lbs
23.5 to 27.5 N·m
2.4 to 2.8 kgf·m
17.4 to 20.3 ft-lbs
(3) Transmission Case Mounting Nut
77.5 to 90.2 N·m
7.9 to 9.2 kgf·m
57.1 to 66.5 ft-lbs
CLUTCH
W1022601
W1040281
W1022873
KiSC issued 03, 2008 A