Checking, Disassembling And Servicing; Travelling Clutch; Checking And Adjusting - Kubota M6800S Workshop Manual

M6800 · M6800S · M8200 · M9000, WSM

4. CHECKING, DISASSEMBLING AND SERVICING

[1] TRAVELLING CLUTCH

(1) Checking and Adjusting

Clutch Pedal Free Travel
1. Stop the engine and remove the key.
2. Slightly depress the clutch pedal and measure free travel (A) at
top of pedal.
3. If adjustment is needed, loosen the lock nut (1), and turn the
turnbuckle (3) to adjust the clutch rod (2) length.
4. Retighten the lock nut (1).
Clutch pedal free travel
Factory spec.
(A) on the pedal
(1) Lock Nut
(2) Clutch Rod
Clutch Pedal Stopper Bolt
1. Measure the height (A) of stopper bolt (2).
2. If the measurement is not within the factory specifications, adjust
it.
3. After adjustment, tighten the lock nut (3) firmly.
Height (A) of clutch
Factory spec.
pedal stopper bolt
(1) Clutch Pedal
(2) Stopper Bolt
2-S4
CLUTCH
35 to 45 mm
1.4 to 1.8 in.
(3) Turnbuckle
W1012214
18 to 20 mm
0.70 to 0.79 in.
(3) Lock Nut
W1012374
KiSC issued 03, 2008 A