Kubota M6800S Workshop Manual page 201

M6800 · M6800S · M8200 · M9000, WSM
Forward-Reverse Synchro Shuttle [M6800S]
The shuttle shift section allows the operators to
change forward and reverse with a shuttle lever. It is
used synchromesh type gear shift.
It also operates as a reduction until when shifting from
forward to reverse.
When the shuttle lever is move to the F or R position,
the shifter (5) is slid to the rear or front by the mechanical
linkage to be engaged with the 21T gear shaft (6) or 20T
gear (9).
Then, the power is transmitted to the 1st shaft (2).
The power is transmitted as follows.
Forward
Gear Shift (1) → Hub (4) → Shifter (5) → 21T Gear
Shaft (6) → 34T Gear (7) → 1st Shaft (2).
Reverse
Gear Shift (1) → Hub (4) → Shifter (5) → 20T Gear (9)
→ 25T Gear (8) → 31T Gear (3) → 1st Shaft (2).
(1) Gear Shaft
(2) 1st Shaft
(3) 31T Gear
(4) Hub
(5) Shifter
3-M13
TRANSMISSION
(6) 21T Gear Shaft
(7) 34T Gear
(8) 25T Gear
(9) 20T Gear
W1013020
KiSC issued 03, 2008 A