Kubota M6800S Workshop Manual page 291

M6800 · M6800S · M8200 · M9000, WSM
4. CHECKING, DISASSEMBLING AND SERVICING
[1] CHECKING AND ADJUSTING
Brake Pedal Free Travel
CAUTION
• Stop the engine and remove the key, then choke the wheel
before checking brake pedal.
1. Release the parking brake.
2. Slightly depress the brake pedals and measure free travel (A) at
top of pedal stroke.
3. If the measurement is not within the factory specifications, loosen
the lock nut (1) and turn the turnbuckle (2) to adjust the rod length
within acceptable limits.
Brake pedal free travel
Factory spec.
(A)
IMPORTANT
• Keep the free travel in the right and left brake pedals equal.
(1) Lock Nut
Parking Brake Lever Free Play
CAUTION
• Stop the engine and chock the wheels before checking
parking brake.
1. Release the parking brake lever (1).
2. Loosen the lock nut (2) on the parking brake rod (3).
3. Adjust the parking brake and length to achieve the reference
value.
4. Tighten the lock nut (2).
5. Pull the parking brake lever (1) just one notch and make sure the
parking brake shaft (5) is activated.
(Reference)
M6800(S)
Parking brake rod length
L
M8200
M9000
NOTE
• After adjusting the parking brake lever free play
- Right and left parking brake for even braking.
- With the parking brake released, make sure that the right
and lefet tires do not drag on.
(1) Parking Brake Lever
(2) Lock Nut
(3) Parking Brake Rod
5-S4
BRAKES
40 to 45 mm
1.6 to 1.8 in.
(2) Turnbuckle
W1011350
158 to 162 mm
6.2 to 6.4 in.
178 to 182 mm
7.0 to 7.2 in.
(4) Brake Lever
(5) Parking Brake Shaft
W1014578
KiSC issued 03, 2008 A