Network Configuration; Tcp/Ip; Enabling Tcp/Ip - Fuji Xerox Color C60 System Administrator Manual

5

Network Configuration

TCP/IP

Transmission Control Protocol (TCP) and Internet Protocol (IP) are a two protocols within
the Internet Protocol Suite. IP manages the transmission of messages from computer
to computer while TCP manages the actual end-to-end connections.
Note
You can configure IPv4 settings at the printer Control Panel or through CentreWare
Internet Services. You can only configure IPv6 through CentreWare Internet Services.

Enabling TCP/IP

Note
TCP/IP is enabled by default. If you disable TCP/IP, you must enable it at the printer
Control Panel before you can access CentreWare Internet Services.
To enable TCP/IP:
1. At the printer Control Panel, log in as System Administrator, press the Machine
Status button, and touch the Tools tab.
2. Touch System Settings > Connectivity & Network Setup > Protocol Settings.
3. Touch TCP/IP - Common Settings.
4. Touch Change Settings.
5. Select the item you want to change and touch Change Settings.
6. Touch IPv4 Mode, IPv6, or Dual Stack to enable both IPv4 and IPv6.
7. Touch Save.
8. Touch Close.
Xerox ® Color C60/C70 Printer 5-1
System Administrator Guide