Authentication Feature Settings; Step1 Authentication Settings - Fuji Xerox DocuWide 6035 User Manual

Authentication Feature Settings

This section describes the settings for using the authentication feature. The opera-
tional flow for this procedure and reference sources are shown below.

Step1 Authentication Settings ..............................................................199

Step2 User Registration (on the Control Panel on the Machine) .........201
Step1 Authentication Settings
Set the authentication mode and restricted functions.
1
Press the <Log In/Out> button.
2
Enter the system administrator UserID with the
numeric keypad or the keyboard displayed, and
then select [Confirm].
Note
3
Press [System Settings].
• The default setting of the UserID is "11111".
• When the password entry field appears, enter
the system administrator password, and then
select [Confirm].
The default setting of the password is "x-
admin".
• When [Passcode Entry - Control Panel] is set
to [Yes], the password entry field appears.
"Password Entry - Control Panel" (P.254)
Authentication Feature Settings
Transmitting
Copy Scan Menu
Job in memory
Job Status
Interrupt
Machine Status
Log In/Out
<Log In/Out> button
System
Cancel
Administrator Login
System
Administrator
System Administrator Menu
User Mode System Settings
Copy from
Memory
Power Saver
Clear All
Stop
Start
Confirm
Keyboard
10
199