Setting Up Authentication For A Usb Smartcard Reader System; Configure Network Authentication Settings; Enable Smartcard Settings; Set The Smartcard Certificate Verification Mode - Fuji Xerox Color C60 System Administrator Manual

Setting Up Authentication for a USB SmartCard Reader System

To use the printer with a card reader system other than Xerox
order and install the Xerox
hardware, software, and instructions for connecting and configuring your card reader
system.
Before you begin:
Install the USB Enablement Kit.
Install a Kerberos authentication server and configure with user accounts.
Connect your card reader to the printer.

Configure Network Authentication Settings

1. Configure network authentication. For details, see
2. Configure Kerberos server settings. For details, see
Settings for Kerberos.

Enable SmartCard Settings

To enable SmartCard settings:
1. At the printer Control Panel, login as Administrator, press the Machine Status button,
and touch the Tools tab.
2. Touch Authentication / Security Settings > Authentication > User Details Setup
> Use of SmartCard.
3. Touch Change Settings.
4. Touch Enabled.
5. Under Jobs Validated by Card, select Copy, Print or Fax/Scan, and touch Save.

Set the SmartCard Certificate Verification Mode

For additional security, you can set the printer to validate a user's SmartCard against
certificates stored on the printer.
To set the SmartCard verification mode:
1. At the printer Control Panel, login as Administrator, press the Machine Status button,
and touch the Tools tab.
2. Touch Authentication / Security Settings > Authentication > User Details Setup
> SmartCard Certificate Verification.
3. Touch Change Settings.
4. Touch Enabled.
Xerox ® Color C60/C70 Printer
System Administrator Guide
®
Common Access Card Enablement Kit. The kit includes
® Secure Access, you must
Network Authentication.
Configuring Authentication Server
Security
6-7