Enabling Sip Fax; Configuring Sip Gateway Registration - Fuji Xerox Color C60 System Administrator Manual

Faxing
1. At the printer Control Panel, press the Machine Status button, then touch the Tools
tab.
2. Touch System Settings > Common Service Settings > Maintenance.
3. Touch Software Options, then touch Keyboard on the Software Options dialog.
4. Enter the software PIN to enable SIP Fax.
5. Touch Save.
6. Follow any prompts given on the screen.
7. Touch Close.

Enabling SIP Fax

Note
Before you begin, purchase and install the SIP Fax Kit.
To enable SIP Fax using CentreWare Internet Services:
1. In CentreWare Internet Services, click Properties > Connectivity > Port Settings.
2. Next to SIP, select Enabled.
3. In CentreWare Internet Services, enable TCP/IP (no special settings are required).
4. In CentreWare Internet Services, click Properties > Protocols > SIP.
5. Enter the SIP User ID, which consists of a SIP user name and IP address, such as
1111@192.168.1.1. (This corresponds to the Fax Number of the printer for the G3
FAX). The IP address is that of the SIP server. If no SIP server is in the environment,
use the printer IP address.
6. Select the appropriate SIP Transfer Protocol.
7. Next to Enable SIP Server, select Yes.
8. Next to SIP Server IP Address Resolution, select DHCP or Manual.
9. Enter the required data in the Primary SIP Proxy Server Setup fields.
10. Enter the required data in the Primary SIP Registrar Server Setup fields.
11. Next to Domain Filtering, select Off, Allow, or Block.
12. Click Apply.

Configuring SIP Gateway Registration

Up to 50 SIP Gateways can be registered. Each entry consists of an ID and a Gateway
Address (IP).
To register an SIP Gateway:
1. In CentreWare Internet Services, click Properties > Protocols > SIP Gateway.
2. Click Create to add a new SIP Gateway ID. Click Edit to revise an existing SIP
Gateway ID.
3. Click Apply.
11-12 Xerox ® Color C60/C70 Printer
System Administrator Guide