Configuring Wsd - Fuji Xerox Color C60 System Administrator Manual

Network Configuration
3. Next to WSD Scan, select Enabled to enable the WSD scan service.
4. Click Apply.

Configuring WSD

To configure the WSD protocol:
1. In CentreWare Internet Services, click Properties > Connectivity > Protocols >
WSD.
2. Edit the following settings if required:
Port Number. The default is 80.
Data Receive Time-Out in seconds. The default is 30
Notification Delivery Time-Out in seconds. The default is 8.
Maximum TTL. The default is 1.
Maximum Number of Subscribers. The default is 50.
3. Click Apply.
5-18 Xerox ® Color C60/C70 Printer
System Administrator Guide