Appendix: Service Program Mode Tables; Service Table Key - Ricoh D131 Service Manual

3. APPENDIX: SERVICE PROGRAM MODE TABLES

3.1 SERVICE TABLE KEY

Notation
Example: [–9 to +9/0.1 mm]
[range/step] The default setting can be adjusted in 0.1mm steps in the range
±9.
Italics Comments added for reference.
An asterisk marks the SP's that are reset to their factory default
*
settings after an NVRAM reset.
DFU Denotes "Design or Factory Use". Do not change this value.
Japan Only The feature or item is for Japan only. Do not change this value.
SEF Short Edge Feed
LEF Long Edge Feed
SM Appendix
What it means
3-1
Service Table Key
D131/D132/D133