Printer Service Mode; Service Mode Table; Service Table Key - Ricoh B156 Service Manual

5.2 PRINTER SERVICE MODE

5.2.1 SERVICE MODE TABLE

Service Table Key

Notation
[range / default / step]
italics
*
DFU
SP1 Mode Number
001 Bit Switch
1 Bit Switch 1 Settings
2 Bit Switch 2 Settings
3 Bit Switch 3 Settings
4 Bit Switch 4 Settings
5 Bit Switch 5 Settings
6 Bit Switch 6 Settings
7 Bit Switch 7 Settings
8 Bit Switch 8 Settings
003 Clear Setting
1 Initialize Printer System
3 Delete Program
004 Print Summary
Print Printer Summary
005 Display Version
006 Sample/ Locked Print
0:Link with Doc. Srv
1:Enable
101 Data Recall
1 Factory
2 Previous
3 Current
4 ACC
SM
CÓPIA NÃO CONTROLADA
Example: [-9 ~ +9 / +3.0 / 0.1 mm step]. The setting can be
adjusted in the range ±9, value reset to +3.0 after an NVRAM
reset, and the value can be changed in 0.1 mm steps with each
key press.
Comments added for your reference.
This value is stored in NVRAM. After a RAM reset, the default
value (factory setting) is restored.
Denotes "Design or Factory Use". Do not change this value
Adjusts bit switch settings.
Note: Currently the bit switches are not being used.
Initializes settings in the "System" menu of the user
mode.
DFU
Prints the printer summary sheet
(An error log is printed in addition to the
configuration page).
Displays the version of the controller firmware.
[0 ~ 1 / 0 / 1 /step]
Recalls a set of gamma settings.
5-115
CÓPIA NÃO CONTROLADA
PRINTER SERVICE MODE
What it means
Function / [Setting]
B156/B220