Laterally Adjustment Of The Thread Catcher - VETRON 5000 Service Manual

03. ADJUSTMENT

03.25. LATERALLY ADJUSTMENT OF THE THREAD CATCHER

GENERAL:
When in position
stitch plate 2 but not touching.
2
B
A
1
3
DISPLAY
» LATERALLY ADJUSTMENT OF THE THREAD CATCHER
01
02
2 5 T h ea r d c a ch t
03
p o s s e t p u
04
05
06
07
08
60 SERVICE MANUAL VETRON 5000
A 1
the thread catcher should be congruent with edge
STEP
Activate the ADJUSTMENT WIZARD
(02.04. / Page 17).
» until chapter 25 appears
on the display.
r
» confi rm.
Turn the machine with the mechanical hand wheel
until the needle point is positioned below the stitch
plate coming from the downside.
3
Loosen screw and move the thread catcher
according the general rule.
3
Fix screw .
Move the thread catcher by hand to make sure
that it is not touching the stitch plate in any position.
» confi rm to proceed to the next point.
B
of the
DESCRIPTION
INFO: Stitch length is set to
0 mm, pedal is blocked,
the display shows the machine
position in degrees.
1