Winding The Bobbin Thread - VETRON 5000 Instruction Book

INSTRUCTION BOOK

16. WINDING THE BOBBIN THREAD

3
CAUTION!
Avoid touching rotating parts to avoid the risk of injury or damage of the machine.
01. Switch on the machine.
02. Place a bobbin 1 on the bobbin winder
03. Push the lever 3 towards the bobbin.
04. After the winding process is finished, the lever
05. Remove the bobbin and cut the thread at the knife
06. Loosen the screw and move the lever
5
on the bobbbin. the capacity of the bobbin should not be used more than 80%.
NOTE!
If necessary the braket
the thread flow to the bobbin.
22 INSTRUCTION BOOK VETRON 5000
6
5
2 .
automatically moves back.
3
4
to adjust the amount of thread
3
6 can be slightly bended to the left or right to optimize
.
4
1
2