Winding The Bobbin Thread - VETRON 5300 Instruction Book

03. OPERATION OF THE MACHINE

05. WINDING THE BOBBIN THREAD

CAUTION!
Avoid touching rotating parts to avoid the risk of injury or damage of the machine.
01. Turn the machine on.
02. Place a bobbin 1 on the bobbin winder
03. Push the lever 3 towards the bobbin.
04. After the winding process is finished, the lever
05. Remove the bobbin and cut the thread at the knife
06. Loosen the screw 5
on the bobbbin. There should be a gap of 1 mm between thread and bobbin edge.
NOTICE!
If necessary, the bracket
thread flow to the bobbin.
07/2020
30
VETRON 5300 - POST BED MACHINE - INSTRUCTION BOOK
6
5
3
2 .
3
and move the lever 3 to adjust the amount of thread
6 can be slightly bended to the left or right to optimize the
automatically moves back.
4 .
4
1
2