Adjustment Of The Lifting Mechanism - VETRON 5000 Service Manual

03. ADJUSTMENT

03.05. ADJUSTMENT OF THE LIFTING MECHANISM

GENERAL:
In position 190° the feed dog should be in his top position
DISPLAY
»
ADJUSTMENT OF THE LIFTING MECHANISM
02
03
0 5 F e d e l i f t
04
s e t u p
05
06
07
08
09
38 SERVICE MANUAL VETRON 5000
1
2
STEP
Activate the ADJUSTMENT WIZARD
(02.04. / Page 17).
» until chapter 05 appears
on the display.
» confi rm.
Loosen the screws of the feed lifting eccentric
2
until it is turning easily on the shaft.
Turn the machine to the 190° position with the
mechanic hand wheel.
In this position turn the feed lifting eccentric
until the feed dog is in it's top position as shown in image 2.
2
Fix the screws .
» confi rm to proceed to the next point.
A
.
DESCRIPTION
INFO: The pedal is blocked. During
turning by hand the display shows
the machine position in degrees.
Stitch length is set to 0 mm. The
tilt blocking mechanism is not
active.
1
1
A