Download
Share
Print this page
  1. Manuals
  2. Brands
  3. VETRON Manuals
  4. Sewing Machine
  5. 5000
  6. Programming manual

VETRON 5000 Programming Manual

Hide thumbs Also See for 5000:

Advertisement

Quick Links

Download this manual See also: Service Manual, Instruction Book
5000 »
PROGRAMMING MANUAL
04/2015

Advertisement

loading

Related Manuals for VETRON 5000

Summary of Contents for VETRON 5000

  • Page 1 5000 » PROGRAMMING MANUAL 04/2015...
  • Page 3 COPY ONE PROGRAM FROM USB TO MACHINE DELETE ONE PROGRAM COPY ALL PROGRAMS FROM MACHINE TO USB COPY ALL PROGRAMS FROM USB TO MACHINE DELETE ALL PROGRAMS ADJUSTMENTS FROM MACHINE TO USB ADJUSTMENTS FROM USB TO MACHINE PROGRAMMING MANUAL VETRON 5000 03...
  • Page 4 04 PROGRAMMING MANUAL VETRON 5000...
  • Page 5 PROGRAMMING MANUAL 01. OVERVIEW OPERATING PANEL P000 TEST HOTKEYS ELECTRONICS AND SEWING REVERSE CONTROL USB-DONGLE PEDAL PROGRAMMING MANUAL VETRON 5000 05...
  • Page 6 Turning changes the values; pressing the JOG KEY enters the value. In the following, the operating type is indicated by the following icons: Input = Press the JOG KEY: Change = Turn the JOG KEY: 06 PROGRAMMING MANUAL VETRON 5000...
  • Page 7 If the backtack function is activated, the following backtack is switched o one time by pushing the key. STITCH LENGTH If the second stitch length is activated, the adjacent LED is lit up. CUSTOMIZABLE BUTTON Default: Toggle foot stroke level PROGRAMMING MANUAL VETRON 5000 07...
  • Page 8 In the following, the operating type is indicated by the following icons: Pressing the hand wheel: stitch-for-stitch function / needle positioning stitch-for-stitch function / needle positioning Turning the hand wheel: REVERSE SEWING Pulling the button changes the sewing direction. 08 PROGRAMMING MANUAL VETRON 5000...
  • Page 9 PROGRAMMING MANUAL 05. CONTROL & MAIN SWITCH MACHINE MAIN SWITCH ON/OFF USB-PORT Identify yourself using the provided USB dongle. PROGRAMMING MANUAL VETRON 5000 09...
  • Page 10 06. PEDAL IDLE POSITION CONSTANT SEWING SPEED (ADJUSTABLE VIA PARAMETER M502) VARIABLE SEWING SPEED FROM 0-100% OF THE CHOOSEN MAXIMUM SPEED (DEPENDING ON SEWING PROGRAM) SEWING FEET LIFT SEAM END PROCEDURE ACTIVATION (DEPENDING ON SEWING PROGRAM) 10 PROGRAMMING MANUAL VETRON 5000...
  • Page 11 PROGRAMMING MANUAL 07. LIGHT The VETRON head module for sewing is equipped with LED sewing area lighting, whose intensity can be controlled via the operating field. For SWITCHING the light ON and OFF, press button » To ADJUST THE LIGHT INTENSITY, proceed as follows:...

  • Page 12: General Safety Instructions

    Exceptions are listed in the regulation EN 50110. The safety guards must be replaced after finishing Only original VETRON spare parts or parts which are cleared by VETRON are allowed to use when repairing the repair and maintenance work.
  • Page 13 figuration. The thread tension, foot pressure and stitch length will be adjusted with increasing material thickness. With the VETRON these settings are made by step motors, they can exactly reproduce the desired setting. All settings like stitch length, thread tension and foot pressure for example are adjusted with parameters on the controler.
  • Page 14 Turn the JOG KEY to select the desired parameter. Push the JOG KEY. The parameter will fl ash and can be changed by turning the JOG KEY. Pushing the JOG KEY again will store your input. 14 PROGRAMMING MANUAL VETRON 5000...
  • Page 15 The appropriate LED will shine on the display. ► Parameter 1 appears on the display. Now you can change the name. ► Turn the JOG KEY to the right. You will get to the program parameters. PROGRAMMING MANUAL VETRON 5000 15...
  • Page 16 Can be switched on when you come to thick joints in the seam. Switching over can be done with key or the electronic handwheel 021 Foot stroke 2 It can also be done with a knee lever (optional) or with the automatic switch parameter 027. 16 PROGRAMMING MANUAL VETRON 5000...
  • Page 17 The stroke on a alternate machine are normally changed by pressing a button or with a knee lever. The VETRON can do this also automatically with the foot pedal. By activating parameter 027 it will activate the facility. When the machine is run a...
  • Page 18 The thread tension on conventional machines is adjusted with a spring. The reproduction of the desired thread tension is di cult. The VETRON sets the thread tension with a step motor. The task of the tension spring is taken over by a elastomer.
  • Page 19 Function 1 = PEDAL Sewing speed will be regulated by the posititon of the pedal. Function 2 = CONSTANT Constant sewing speed as selected in parameter 041. 041 Maximum speed The maximum speed will be entered here. PROGRAMMING MANUAL VETRON 5000 19...
  • Page 20 Automatic foot pressure control On conventional machines the foot pressure is generated by a spring and will be adjusted seldom. The VETRON also generates the foot pressure with a spring, but the spring is pre-stressed by a step motor with gear (parameter 050). In di erent programs can di erent foot pressure be applied.
  • Page 21 The foot pressure is the same for each material thickness Operation mode CONSTANT 4 mm 2 mm 30% adjusted Material thickness in mm Foot pressure High percentage in % Low percentage Operation mode 1-100% (Pressure increase over speed) 30% adjusted Speed PROGRAMMING MANUAL VETRON 5000 21...
  • Page 22 Parameter 078 can only be selected when the position of stitch placing is activated 078 Target stitch position in parameter 085, 086 or 087. The position of the needle point above the material will be set with this parameter. 22 PROGRAMMING MANUAL VETRON 5000...
  • Page 23 By releasing the key it will go back to the stroke value). STROTG = Foot stroke for this program. (By pressing the key you will switch to the 2 stroke. Pressing it again will change back to the 1 stroke). PROGRAMMING MANUAL VETRON 5000 23...
  • Page 24 SL TGL = When the knee switch is touched the 1 time it will switch to the 2 stitch length. By touching the knee switch again it will go back to the 1 stitch length. 24 PROGRAMMING MANUAL VETRON 5000...
  • Page 25 The stitches will be exactly in the same position with the stitch in stitch backtack. The feeding will be switched when the machine is standing still. It will be used for visible backtacks with high quality. PROGRAMMING MANUAL VETRON 5000 25...
  • Page 26 (parameter 010) (e.g. 4.0 mm). -4.0 mm = When the stitch length for A in backtack is entered in the minus range this part of the backtack will be done in reverse. 26 PROGRAMMING MANUAL VETRON 5000...
  • Page 27 The machine is blocked after the thread cut and on the display you will see the request to change the bobbin. After changing the bobbin you have to press the safety switch (X Key) to reset the bobbin thread counter. PROGRAMMING MANUAL VETRON 5000 27...
  • Page 28 = Stitch length for B in backtack can be choosen irrespective of the main stitch length (parameter 010) (e.g. 4,0mm). -4.0 mm = When the stitch length for B in backtack is entered in the minus range this part of the backtack will done in reverse. 28 PROGRAMMING MANUAL VETRON 5000...
  • Page 29 999 Chain program INFO! A chain program will be used when di erent operations on a work piece are done one after the other. The machine will set itself automatically for the next work step. PROGRAMMING MANUAL VETRON 5000 29...
  • Page 30 Program Key = The next work step will be initiated by pressing the key (see next page) Electronic handwheel = The next work step will be initiated by pressing the electronic handwheel (see next page) 30 PROGRAMMING MANUAL VETRON 5000...
  • Page 31 = The switch will take place (if part of the program) after the end backtack and thread trimming (picture 3). The next seam starts with a backtack (picture 4) (if part of the program). Picture 3 Picture 4 PROGRAMMING MANUAL VETRON 5000 31...
  • Page 32 Choose number for this program. ► Push the JOG KEY to accept your selection. Enter program name or number on the display. When the complete name is entered V T O move the cursor below the right arrow. 32 PROGRAMMING MANUAL VETRON 5000...
  • Page 33 The program name and number for the chain progam appears on the display and can be used now. Summary programchain EXAMPLE up to 10 chain links PROGRAM SEAM START SEAM SWITCH OVER OPTION END OF SEAM PROGRAMMING MANUAL VETRON 5000 33...
  • Page 34 Program name or number can be entered. ► Turn the JOG KEY to select a letter or number. Up to 15 letters or numbers can be entered. ► Push the JOG KEY to jump to the next free space. 34 PROGRAMMING MANUAL VETRON 5000...
  • Page 35 Turn the JOG KEY to select YES or NO. Y S N E / O D l t e e e ► Push the JOG KEY to confi rm selection. The display will show COPY PROGRAM. PROGRAMMING MANUAL VETRON 5000 35...
  • Page 36 If you insert the dongle into the USB-Port a fi le with the serial number of the machine will be opend automatically. In this way you can transfer program from one machine to another. Serial number and program can be selected and transfered to the appropriate machine. Please use only VETRON USB Dongle to secure a safe transfer of data. DISPLAY...
  • Page 37 PROGRAMMING MANUAL 15. PROGRAMMVERWALTUNG MIT USB DONGLE -2-4 PROGRAMMING MANUAL VETRON 5000 37...
  • Page 38 Push the JOG KEY > 0 3 0 Your machine number will be shown on the display in brackets. ► Turn the JOG KEY to select desired machine. 0 1 4 ► Push the JOG KEY 38 PROGRAMMING MANUAL VETRON 5000...
  • Page 39 ADJUSTMENTS FROM USB TO MACHINE ► Push the JOG KEY All data will be tranfered to the machine. > NEVER remove the USB dongle while data is transfered. Display will show CONFIGURATION USB ---> MASCHINE. > PROGRAMMING MANUAL VETRON 5000 39...
  • Page 40 XI´AN TYPICAL EUROPE GMBH Hertelsbrunnenring 9 D-67657 Kaiserslautern Tel.: +49 (0)631 316019-0 Fax: +49 (0)631 316019-11 E-mail: sales@typical-europe.com www.typical-europe.com www.vetron-europe.com...