Top Feed Eccentric - VETRON 5000 Service Manual

03. ADJUSTMENT

03.18. TOP FEED ECCENTRIC

GENERAL:
At 190° the crank
A
DISPLAY
» TOP FEED ECCENTRIC
01
02
1 8 T o p f e e d l if
03
e c c e n t r c setup i
04
05
06
07
08
52 SERVICE MANUAL VETRON 5000
A
of the stitch regulator should be in the top dead centre.
STEP
Activate the ADJUSTMENT WIZARD
(02.04. / Page 17).
» until chapter 18 appears
on the display.
t
» confi rm.
Loosen the screw
Turn the machine to the 190° position with the mechanic hand wheel.
Turn the machine to the 190° position with the
mechanical hand wheel. In this position turn the eccentric
A
until the crank
Fix the screw 2 .
» confi rm to proceed to the next point.
1
2 of the top feed eccentric.
reaches the top dead centre.
2
DESCRIPTION
INFO: The pedal is blocked. During
turning by hand the display shows
the machine position in degrees.