Winding The Bobbin Thread - VETRON 5400 Instruction Manual

03. OPERATION OF THE MACHINE
6
5
3
CAUTION!
Avoid touching rotating parts to avoid the risk of injury or damage of the machine.
01. Turn the machine on.
1
02. Place a bobbin on the bobbin winder
03. Push the lever towards the bobbin.
3
04. After the winding process is finished, the lever
05. Remove the bobbin and cut the thread at the knife
06. Loosen the screw 5 and move the lever
on the bobbbin. There should be a gap of 1 mm between thread and bobbin edge.
NOTICE!
If necessary, the bracket
thread flow to the bobbin.

05. WINDING THE BOBBIN THREAD

2 .
3
automatically moves back.
4 .
3 to adjust the amount of thread
6 can be slightly bended to the left or right to optimize the
VETRON 5400 - CYLINDER ARM MACHINE - INSTRUCTION BOOK
4
1
2
07/2020
25