Winding The Bobbin Thread - VETRON 5000 Instruction Book

INSTRUCTION BOOK

16. WINDING THE BOBBIN THREAD

CAUTION!
Avoid touching rotating parts to avoid the risk of injury or damage of the machine.
01. Turn the machine on.
02. Place a bobbin 1 on the bobbin winder
03. Push the lever 3 towards the bobbin.
04. After the winding process is finished, the lever
05. Remove the bobbin and cut the thread at the knife
06. Loosen the screw 5 and move the lever
on the bobbbin. There should be a gap from 1 mm between thread and bobbin edge.
NOTE!
If necessary, the bracket
thread flow to the bobbin.
08/2017
22
VETRON 5000/5100 - FLAT BED MACHINE
6
5
3
2 .
3 automatically moves back.
4 .
3 to adjust the amount of thread
6 can be slightly bended to the left or right to optimize the
4
1
2