Winding The Bobbin Thread - VETRON 5390 Instruction Manual

03. OPERATION OF THE MACHINE
6
5
3
CAUTION!
Avoid touching rotating parts to avoid the risk of injury or damage of the machine.
01. Turn the machine on.
02. Place a bobbin 1 on the bobbin winder
03. Push the lever 3 towards the bobbin.
04. After the winding process is finished, the lever
05. Remove the bobbin and cut the thread at the knife
06. Loosen the screw 5
on the bobbbin. There should be a gap from 1 mm between thread and bobbin edge.
NOTICE!
If necessary, the bracket
thread flow to the bobbin.
2 .
3
and move the lever 3 to adjust the amount of thread
6 can be slightly bended to the left or right to optimize the
VETRON 5390 - POST BED MACHINE - INSTRUCTION BOOK

05. WINDING THE BOBBIN THREAD

1
2
automatically moves back.
4 .
4
07/2018
25