VETRON 5000 Service Manual page 58

DISPLAY
» THREAD CATCHER HEIGHT
INFO:
The height of the thread catcher is factory set through the use of washers.
However if a correction is necessary add or remove washers at position
04
05
06
ATTENTION:
During assembly of the thread catcher support
between the roller lever
07
08
STEP
Loosen screw to add or remove washers.
1
Pull the thread catcher support
If neccessary add or remove washers.
5 and the hook saddle
Fix screw 1 with taking care to avoid vertical play.
» confi rm to proceed to the next point.
DESCRIPTION
B
.
away upwards.
2
2 be sure to put the washer
6 .
03. ADJUSTMENT
03.24. THREAD CATCHER HEIGHT
C
SERVICE MANUAL VETRON 5000 59
-2-2