Lower Media Exit Roll Assembly Removal - Lexmark W850n Manual

4024-110

Lower media exit roll assembly removal

1.
Remove the finisher front door assembly. See
2.
Remove the rear upper cover. See
3.
Remove the upper media bin assembly. See
4.
Remove upper media bin vertical cover. See
5.
Remove the stapler unit frame. See
6.
Remove the media eject clamp motor assembly. See
page 4-66.
7.
Remove the media eject unit assembly. See
8.
Remove the media compiler unit assembly. See
page 4-69.
9.
Remove the media eject motor assembly. See
10.
Remove the media eject shaft assembly. See
11.
Remove the main paddle shaft assembly. See
12.
Loosen the two screws securing the belt tensioner bracket (A) to the finisher, and move it down in the
direction of the arrow.
13.
Remove the belt (exit) (B) from the lower exit roll drive pulley 20T (C).
4-82
Finisher Service Manual
"Rear upper cover removal" on page
"Stapler unit frame removal" on page
A
A
Tighten
second
Tighten
first
"Finisher front door assembly removal" on page
"Upper media bin assembly removal" on page
"Right eject cover removal" on page
"Media eject clamp motor assembly removal" on
"Media eject unit assembly removal" on page
"Media compiler unit assembly removal" on
"Media eject motor assembly removal" on page
"Media eject shaft assembly removal" on page
"Paddle and roll exit assembly removal" on page
B
C
4-27.
4-24.
4-20.
4-21.
4-54.
4-59.
4-78.
4-74.
4-86.
Rear