16.5
Removing the headlight mask with the headlight
–
Remove the faulty fuse.
Guideline
Fuses res - 10 A and 20 A - spare fuses
Fuse 1 - 20 A - main fuse, motor electronics control unit,
ignition lock
Fuse 2 - 10 A - ignition lock, main switch, tip switch
Fuse 3 - 10 A - high beam, low beam
Fuse 4 - 10 A - horn, brake light, turn signal
F01686-10
Fuse 5 - 10 A - water pump
Info
You can recognize a faulty fuse by a burned-out fuse
A
wire
Warning
Fire hazard Incorrect fuses overload the electrical sys-
tem.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
–
Insert spare fuse with the correct rating only.
Fuse (75011088010) (
Fuse (75011088020) (
Tip
Replace the spare fuse in the fuse box so that it is
available if needed.
–
Check that the power consumer is functioning properly.
–
Close the fuse box cover and allow the catches to engage.
Finishing work
–
Install the KTM PowerPack. (
–
Lock the seat. (
Preparatory work
–
Deactivate the vehicle. (
–
Fold the seat up. (
–
Remove the KTM PowerPack. (
–
Mount the protection cap. (
ELECTRICAL SYSTEM 16
.
p. 133)
p. 133)
p. 108)
p. 69)
p. 43)
p. 69)
p. 107)
p. 71)
101