Control Panel - Fuji Xerox ApeosPort C7070 Reference Manual

Control Panel

Refer
For Control Panel, refer to the Reference Guide - Operations.
10
Fax Module
Model
No. Component
Power button
1
2 Home button
NFC touch area
3
Data indicator
4
5 Touch panel display
Note on status display
6
lamp
USB memory slot
(optional)
7
Built-in IC card reader
8
(optional)
9 Paper clip tray
One-touch buttons
10
9
8
7
The power switches on.
Note When "Please wait..." is displayed, the machine is warming up. The

use of machine is not available during this time.
If the power does not switch on, confirm that the Reset button is in

the reset position (button is pushed in) and the power plug is con-
nected.
Pressing this button displays the Home screen.
This is an area for you to hold up your NFC-supported mobile devices over. To com-
municate interactively, the NFC function of this machine needs to be enabled.
This indicator blinks while data is being sent from the machine or data is being
received from the client PC.
Also, this indicator lights up when documents are saved in the machine or the fax is
stored in a local folder.
Displays messages required for operation, and buttons for various features.
The lamp lights up in blue at an instant of operation reception.
When an error occurs, the lamp blinks in orange.
Insert a USB memory device directly here.
Note A memory card reader or a USB memory device cannot be connected
to the USB memory slot with a USB cable. Note that the machine will
not recognize the memory on a memory card reader or a memory
device connected to a USB interface connector on the rear side of the
machine when a USB memory device is already inserted in the USB
memory slot.
Used to authenticate a user using an IC card.
Used for placing paper clips and staples.
Allows you to specify a recipient with the simple press of a button. You can use the
buttons for the Fax, Internet Fax, Scan (E-mail), and Scan (to PC) jobs.
-5-
i Before Using the Machine
6 5
Function
1
2
3
4