Cross-Point Control Block - Sony MVS-8000X System User Manual

Cross-Point Control Block

In the cross-point control block, you can
select the signals to be used in this M/E
bank or PGM/PST bank.
2 Source name displays
Key row
Background A row
1 Cross-point buttons
a Cross-point buttons
These buttons select the signals used for
video creation on this M/E bank or PGM/
PST bank. Each row of buttons corresponds
to one or more signal buses within the
switcher.
Key row: The buttons in this row select the
bus signals specified with the key row
delegation buttons ([DSK1] to [DSK8],
[DME1] to [DME4], [UTIL1], or
[UTIL2]) or delegation buttons in the
auxiliary bus control block.
50
Names and Functions of Parts of the Control Panel
3 Key row delegation buttons
Background B row
The later pressed delegation button
takes precedence and the selection is
reflected in the key row.
For details of DSK5 to DSK8
assignment, see "Assigning Buttons for
Selection of Keys 5 to 8 in the Setup
Menu" (page 459) in Appendix
(Volume 1).
Background A row: Press the desired
button to select the signal as the current
4 XPT HOLD button
5 SHIFT button