Inhibiting Utility 2 Bus And Key Operations - Sony MVS-8000X System User Manual

To return all device selection button assignments to the factory
default state
In the Joystick/Trackball Module menu, press [Default].

Inhibiting Utility 2 Bus and Key Operations

You can inhibit operations on the utility 2 bus and keys 1 to 8 of the M/E and
PGM/PST banks by menu operations.
This inhibitions apply for the following control blocks.
• Cross-point control block
• Transition control block
• Independent key transition control block
1) Only when the Key1, 2, Key 3, 4, Key5, 6 or Key7, 8 are assigned by the Compact Key Module
Assign menu.
Notes
This operation cannot be done in the CCP-9000A.
1
2
3
4
962
Overall Control Panel Settings (Config Menu)
In the Panel >Config menu, press [Operation Inhibit].
Operation Inhibit menu appears.
Press [M/E Operation Inhibit].
The M/E Operation Inhibit menu appears.
In the list in the status area, using any of the following methods, select the
switcher bank for which operations are to be inhibited.
• Press directly on the desired switcher bank in the list.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter
1 Bank
In the <M/E Operation Inhibit> group, press the utility 2 bus or key button
([Util2 Bus] or [Key1] to [Key8]) for which operations are to be inhibited.
1)
Adjustment
Switcher bank selection for
inhibiting operations
Setting values
1 and upwards