Setting Independent Key Transition Dme Wipe Modifiers - Sony MVS-8000X System User Manual

Multi format switcher system

Hide thumbs Also See for MVS-8000X System:

Table of Contents

In the <Pattern Select> group of the Key1 DME Wipe Adjust menu, press

[1ch] for one-channel mode or [2ch] for two-channel mode.

The Pattern Select menu appears.

Select the desired DME wipe pattern group with one of the following

(In two-channel mode, only Page Turn and Page Roll are selectable.)

• Slide/Squeeze: slide and squeeze

• Split/Door: split and door

• Mirror/Sphere: mirror and sphere

• Character Trail: character trail

• Wave/Ripple: wave and ripple

• Page Turn/Roll: page turn and page roll

• Frame I/O: frame in/out

• 2D Trans/3D Trans: 2D Trans and 3D Trans

• Sparkle/Split Slide: sparkle and split slide

• User Program: user programmable DME

For details of DME wipe patterns, see "Types of DME Wipe Pattern"

(page 262) and "DME Wipe Pattern List" (page 418).

The patterns from the selected pattern group appear on the screen.

Press the button to select the desired pattern.

Setting Independent Key Transition DME Wipe

You can add modifiers such as pattern position and size for an independent key

transition DME wipe.

For introductory information, see "Setting the DME wipe position

(Positioner)" (page 278) and "Setting the DME wipe pattern size (Size)" (page

Setting the DME wipe position (Positioner)

For applicable pattern numbers, see page 270.

In the <Position> group of the Key1 DME Wipe Adjust menu, press

[Position], turning it on.

Set the following parameters.

DME Wipe Settings for Independent Key Transitions