Sony MVS-8000X System User Manual page 159

Multi format switcher system

Hide thumbs Also See for MVS-8000X System:

Table of Contents

Edge type and key fill/key source position

The key edge modification function has two modes: a mode ("key drop ON

mode") in which the key fill/key source position moves downward, and a mode

("key drop OFF mode") in which it does not move downward.

This applies a border below and to the right

for example, of the key. You can adjust the

border width, position, and density.

This applies a shadow below and to the right

for example, of the key. You can adjust the

shadow width, position, and density.

This uses the outline of the original key as

the key. You can adjust the width and density

of the outline. You can also enable the

separate edge function, and adjust the top,

bottom, left, and right outline widths

This applies an embossing effect to the

outline of the key. You can adjust the width

and position of the embossing, and the

density. You can adjust the density

separately for key fill and key edge. When

embossing is on, the Fine Key and zabton

functions go off.

This softens the edge of the key.

This inserts a translucent pattern behind a

key. You can adjust the pattern size,

softness, density and color.