Sony MVS-8000X System User Manual page 202

a) In the "4H mode" and when [Fine Key] (page 181) is on, the setting value range is 0 to 4.
b) When a wipe pattern key or key wipe pattern key is selected as the key type
• Separate edge on
The border width settings can be made independently for left, right, top, and
bottom sides. The separate edge function is only available when luminance
key, linear key, or chroma key is selected as the key type.
Knob
1
2
3
4
a) In the "4H mode" and when [Fine Key] (page 181) is on, the setting value range is 0 to 4.
To adjust the edge fill color
When [BDR] is selected, the [MORE] button lights amber. Pressing the
[MORE] button to turn it green then allows you to adjust the edge fill color
parameters with the knobs.
Knob
1
2
3
4
Setting the drop border or shadow parameters
When the [DROP BDR] or [SHDW] button is lit green, the parameter settings
differ between the "key drop OFF" and "key drop ON" modes (see page 159)
as shown below. Switching between these two modes is made by turning the
[KEY DROP] button on or off.
• "Key drop OFF" mode
Knob
1
2
4
a) In the "4H mode" and when [Fine Key] (page 181) is on, the setting value range is 0 to 4.
202
Key Setting Operations With the Key Control Block
Parameter Adjustment
Top Top edge width
Left Left edge width
Right Right edge width
Bottom Bottom edge width
Parameter Adjustment
Luminance Luminance
Saturation Saturation
Hue Hue
Density Density
Parameter Adjustment
Width Width
Position Position
Density Density
Setting values
a)
0 to 8
a)
0 to 8
a)
0 to 8
a)
0 to 8
Setting values
0 to 100
0 to 100
359 to 0
0 to 100
Setting values
a)
0 to 8
359 to 180
0 to 100