Dim And Fade Settings - Sony MVS-8000X System User Manual

Masking the Metal effect with a selected pattern
Press [Mask] to display the Mask menu and set the type of pattern and
modifiers.
For details, see "Mask Settings" (page 548).

Dim and Fade Settings

Notes
The Dim and Fade functions are not supported on the MVE-8000A.
Applying the Dim effect
1
2
3
4
546
DME Special Effect Operations
Gold: Give a gold gloss to the input video.
Silver: Give a silver gloss to the input video.
Rainbow: Give a rainbow color gloss to the input video.
Variable: Give a metallic gloss to the input video in any color by adjusting
the following parameters.
Knob Parameter Adjustment
2 Saturation Saturation
3 Hue Hue
In the DME menu, select VF7 'Enhanced Video Modify' and HF3 'Dim &
Fade.'
The Dim & Fade menu appears.
Press [Dim], turning it on.
This enables the Dim effect.
Set the following parameters.
Knob Parameter Adjustment
1 Start Point where dimming starts (dim
start point)
2 Gain Degree of dimming
Press [Flat Color] and set the parameters for the color of the depths of the
picture.
Setting values
0.00 to 100.00
359.99 to 0.00
Setting values
–100.00 to +100.00
0.00 to 100.00