Key Type Setting - Sony MVS-8000X System User Manual

• Press the [KEY1] button in the key delegation row of the M/E-1 bank twice
in rapid succession.
• In the key control block, press the M/E delegation button [M/E1], then press
the key delegation button [KEY1] twice in rapid succession.
Any of the above operations displays the M/E1 >Key1 menu.
Note that you can access the DSK menus by pressing the button for the
corresponding key in the downstream key control block twice in rapid
succession.
Notes
• To select [M/E 4] with the top menu selection buttons, it is first necessary to
assign a button in the Setup menu. For details, see "Assigning a Button for
M/E-4 Selection in the Setup Menu" (page 458).
• To select [Key5] to [Key8], and [DSK5] to [DSK8] in the key control block,
a previous assignment in the Setup menu is required. For details, see
"Assigning Buttons for Selection of Keys 5 to 8 in the Setup Menu" (page
459).

Key Type Setting

Setting the key type in a menu
1
2
3
164
Key Setting Operations Using Menus
In the M/E-1 >Key1 menu, select HF1 'Type.'
The Type menu appears.
In the <Key Type> group, select the key type.
Luminance: luminance key
Linear: linear key
Chroma: chroma key
Color Vector: color vector key
Wipe Pattern: wipe pattern key
Key Wipe Pattern: key wipe pattern key
For the selected key type, you can now set the parameters.
For an overview of the key types, see "Key Types" (page 156).
Carry out the following settings as required, depending on the key type
selected in step 2.
To enable clean mode (see page 157) for a luminance key, linear key or
color vector key: Select [Clean Mode] so that it is set on.