Sony MVS-8000X System User Manual page 303

b Display of available image capacity
This shows the remaining number of frames. When no more frames can be
stored, in pair mode "1" or "0" appears in red, and in single mode "0" appears
in red.
The lower figure shows the remaining number of frames that can be used as
extended clips.
Notes
When the signal format is 1080P, each time a still image is saved the remaining
space is reduced by two frames.
c Target FM selection buttons
Still/duration display
The border color shows the status as follows:
Blue: selected as the reference channel
Amber: selected, but not the reference channel
Black: not selected
Press one of these to select which of the selected outputs (FM1 and FM2 in the
example shown) the operation applies to.
The following information appears on the button.
Status display
File name (e.g. image001) and thumbnail: when a file is output
Black: when a black signal is output
Through: when the input image is output
Freeze: when a freeze is output
Record: when continuously capturing images (record)
Extended clip display
Status display
Reposition/Lock status display
303
Still Image Operations