Sony MVS-8000X System User Manual page 664

Multi format switcher system

Hide thumbs Also See for MVS-8000X System:

Table of Contents

Setting the start point and stop point with the [SET XX] buttons

When you enter a timecode and make a setting with the [SET START TC],

[SET STOP TC], or [SET DUR] button in the optional device control block

(MKS-8036A search dial module), the timecode display changes as follows.

With these buttons you can set the start point and stop point timecodes, and the

duration (the duration is not displayed). When two of these values are set, the

remaining one is automatically determined.

Control of VTRs, Extended VTRs, and Disk Recorders

In the numeric keypad control block, press the [EFF] button, turning it on.

The [RCALL] button in the numeric keypad control block lights.

With the region selection buttons in the numeric keypad control block,

select the region.

You can select more than one button.

Enter the number of the register to be recalled with the numeric keypad

Press the [REWIND] button in the keyframe control block.

The VTR/Extended VTR/disk recorder automatically advances to the

timecode value set as the start point.

While the VTR/Extended VTR/disk recorder is operating, the [ALL

STOP] button in the device control block flashes amber, and when the start

point is reached lights green.

If the operating VTR/Extended VTR/disk recorder is selected as the

reference region in the device control block, the [CUE] button also flashes

and lights in the same way as the [ALL STOP] button. Also, when the start

point is reached, the [STOP] button lights amber.

Press the [RUN] button in the keyframe control block.

The VTR/Extended VTR/disk recorder is now controlled according to the

keyframe data.

Press the [SET START TC] button, and enter "00000000" from the

numeric keypad control block.

(DUR (not displayed)