Dme Wipe Settings For Independent Key Transitions; Basic Procedure For Independent Key Transition Dme Wipe Settings - Sony MVS-8000X System User Manual

Multi format switcher system

Hide thumbs Also See for MVS-8000X System:

Table of Contents

DME Wipe Settings for Independent Key

You carry out independent key/downstream key transition DME wipe setting

operations using the DME Wipe Adjust menu for each keyer.

For an overview of independent key transitions, see page 148.

This section describes the independent key transition DME wipe settings,

taking the M/E-1 >Key1 >Transition >DME Wipe Adjust menu as an example.

Basic Procedure for Independent Key Transition DME

Wipe Settings

Accessing the independent key transition DME wipe settings

As an example, to access the M/E-1 >Key1 >Transition >DME Wipe Adjust

menu, carry out the following operation.

• In the menu control block, select the top menu selection button [M/E 1], and

select VF1 'Key1' and HF6 'Transition' to display the Transition menu for

key 1. Next, press [DME Wipe Adjust].

If VF1 [Key5] is shown, press the switching button at the top of the menu, so

that [Key1-4] appears, and press VF1 [Key1].

To select [M/E-4], a previous assignment in the Setup menu is required.

Carrying out the above operation displays the M/E-1 >Key1 >Transition

>DME Wipe Adjust menu (which will be referred to below as simply the Key1

DME Wipe Adjust menu).

Selecting the independent key transition DME wipe pattern

You select the independent key DME wipe pattern from the list of patterns

displayed in the menu.

To select a DME wipe pattern for independent key1 on the M/E-1 bank, use the

following procedure.

DME Wipe Settings for Independent Key Transitions