• When the [PTN] button is lit green
Knob
1
2
3
Selecting key fill
Select whether to use a color matte as key fill, or the signal on the key fill bus.
When using a color matte: Press the [MATTE FILL] button, setting it on. The
When using the key fill bus signal: Press the [MATTE FILL] button, turning
200
Key Setting Operations With the Key Control Block
Parameter
Adjustment
Size
Pattern size
Soft
Edge softness
Density
Key density
button lights green, and you can now set the parameters with the knobs.
Knob
Parameter
Adjustment
1
Luminance
Color 1 luminance
2
Saturation
Color 1 saturation
3
Hue
Color 1 hue
When [Mix Color] is selected in the key fill Matte Adjust menu, you can
further adjust color 2.
When [Mix Color] is on, and the [MORE] button is lit amber
Knob
Parameter
Adjustment
1
Luminance
Color 1 luminance
2
Saturation
Color 1 saturation
3
Hue
Color 1 hue
4
Size
Pattern size
When [Mix Color] is on, and the [MORE] button is lit green
Knob
Parameter
Adjustment
1
Luminance
Color 2 luminance
2
Saturation
Color 2 saturation
3
Hue
Color 2 hue
4
Soft
Edge softness
it off.
To select the key fill signal, use the key bus buttons in the cross-point
control block.
Setting values
0 to 100
0 to 100
0 to 100
Setting values
0 to 100
0 to 100
359 to 0
Setting values
0 to 100
0 to 100
359 to 0
0 to 100
Setting values
0 to 100
0 to 100
359 to 0
0 to 100