Copy And Swap; Video Process; Color Corrector - Sony MVS-8000X System User Manual

Multi format switcher system

Hide thumbs Also See for MVS-8000X System:

Table of Contents

Copy and Swap

This function can be used to copy and swap the settings among the M/E-1 to

M/E-3, and PGM/PST banks or between keyers.

The following settings can be copied or swapped.

• Overall settings for the M/E and PGM/PST banks

• Keyer settings

• Wipe settings in a transition control block

• Wipe settings in an independent key transition control block

• DME wipe settings in a transition control block

• DME wipe settings in an independent key transition control block

• Matte color settings (color 1, color 2, and how to compose them)

• Color settings

• DME channel settings

• Format converter input settings (copy only)

• Format converter output settings (copy only)

For details, see "Copy and Swap" (page 352).

The term "video process" is applied to adjustments to the gain, hue, black level

of the input video signal. There are two types of adjustment; adjustment of an

individual input signal and adjustment as image effects on a particular bus.

For details, see "Video Process" (page 368).

The color corrector enables video signal color correction (black balance/white

balance adjustment, gamma correction, knee correction, etc.).

The color corrector includes the following adjustments.

• Input video processing

• Primary color correction

• Secondary color correction

• Luminance processing

• Spot color adjustment

• Output video processing

• YUV/RGB clip

For details, see Chapter 9 "Color Corrector" (page 371).

Basic Video Processing