Adjusting the video signal
You can change the gain of the foreground signal, or vary the Hue. There are
separate adjustments for the gain of the whole video signal, or Y and C
individually.
1
2
Selecting Key Fill and Key Source
Notes
The only signals that can be selected as key signals in the M/E-4 bank are
premium inputs (inputs to the PREMIUM INPUTS connectors 1 to 20 of the
switcher).
Selecting key fill and key source
To select key fill and key source for key 1 on the M/E-1 bank, use the following
procedure.
1
2
3
4
174
Key Setting Operations Using Menus
In the Chroma Adjust menu, set [FRGD CCR] on.
Adjust the following parameters.
Knob
Parameter
Adjustment
1
Video Gain
Overall gain of video signal
2
Y Gain
Y signal gain
3
C Gain
C signal gain
4
Hue
Hue offset amount
In the M/E-1 >Key1 menu, select HF1 'Type.'
The Type menu appears.
In the <Key Fill> group, select either of the following for use as key fill.
Key Bus: signal selected on the key 1 fill bus
Matte: signal from the dedicated color matte generator
If you selected [Key Bus] in step 2, press the key delegation button
[KEY1] in the cross-point control block and select the key fill signal in the
key row.
If you selected [Matte] in step 2, in the same Type menu, press the [Matte
Adjust] button to display the Matte Adjust menu, then adjust the single-
Setting values
–100.00 to +100.00
–100.00 to +100.00
–100.00 to +100.00
–180.00 to +180.00