Masks - Sony MVS-8000X System User Manual

Knob
1
2
Press the [MORE] button lit amber, changing it to green, then adjust the
following parameters.
Knob
1
2
3
4

Masks

Using the main mask
In the key control block, press the [MAIN MASK] button, turning it on.
The parameter settings depend on the mask source selected as [Box] or
[Pattern] in the <Mask Source> group of the Main Mask menu for the key.
• When box is selected
Knob
1
2
3
4
When box is selected and the [MORE] button is lit amber, there are more
settings. Press the [MORE] button, so that it changes from amber to green to
make the extra setting.
Knob
1
• When pattern is selected
Knob
1
2
Parameter Adjustment
Size Pattern size
Soft Pattern edge softness
Parameter Adjustment
Luminance Luminance
Saturation Saturation
Hue Hue
Density Density
Parameter Adjustment
Top Top position
Left Left position
Right Right position
Bottom Bottom position
Parameter Adjustment
Soft Box softness
Parameter Adjustment
Size Pattern size
Soft Edge softness
Setting values
0 to 100
0 to 100
Setting values
0 to 100
0 to 100
359 to 0
0 to 100
Setting values
–100 (shown as –00) to +100
–100 (shown as –00) to +100
–100 (shown as –00) to +100
–100 (shown as –00) to +100
Setting values
0 to 100
Setting values
0 to 100
0 to 100
Key Setting Operations With the Key Control Block
205