Applying A Dme Effect To A Key - Sony MVS-8000X System User Manual

Knob
3
a) The pattern is the same as a standard wipe. (See "Wipe Pattern List" (page 412).)
Using the subsidiary mask
In the key control block, press the [SUB MASK] button, turning it on. The
parameter settings depend on the mask source selected as [Wipe] or [Utility 1
Bus] in the <Mask Source> group of the Sub Mask menu for the key.
• When wipe is selected
Knob
1
2
• When utility 1 bus is selected
Knob
1
2

Applying a DME Effect to a Key

Notes
For one M/E bank, DME effects (including DME wipes) can be used in up to
two places simultaneously.
For example, if one DME channel wipe pattern is selected for the background,
a DME can only be used in one place on keys 1 to 4. If two or more channels
are selected, then no DME can be used on keys 1 to 4.
Assigning a DME to a key
1
2
206
Key Setting Operations With the Key Control Block
Parameter Adjustment
Pattern Pattern number
Parameter Adjustment
Size Pattern size
Soft Edge softness
Parameter Adjustment
Clip Reference level for
creating mask signal
Gain Gain
In the key control block, press the delegation buttons [M/E1] and [KEY1].
Using the DME channel selection buttons, select the DME channel (DME1
to DME8) for applying the effect.
The lit colors of the [DME1] to [DME8] buttons indicate the DME
assignment.
Lit green: Shows the DME assigned to the currently selected key.
Setting values
a)
1 to 24
Setting values
0 to 100
0 to 100
Setting values
+109 to –7
–100 (shown as –00) to +100