Sony MVS-8000X System User Manual page 314

Normal mode: Movement in the horizontal direction is in two-pixel
Black and white mode: Movement in the horizontal direction is in one-pixel
Notes
It is not possible to save an image moved with the reposition function directly
to frame memory.
1
2
3
4
5
Fixing the output image selection (lock function)
For the output of each of FM1 to FM8, this fixes the image at the current
output. When this lock is enabled, even if the output is recalled in a snapshot
or keyframe, the images output to FM1 to FM8 are preserved.
Notes
When the signal format is 1080P, this function cannot be used.
314
Still Image Operations
increments.
increments, and for each pixel moved the color is inverted.
In the Frame Memory menu, select VF3 'Reposition/Lock' and HF1
'Reposition.'
The Reposition menu appears. In this menu, you can also enable the V/K
mode (see page 308).
In the frame memory selection area, select the FM output (see page 307).
In the <Reposition> group, select the movement mode.
Normal: Move in normal mode.
Black&White: Move in black & white mode.
With the knobs, adjust the parameters to move the image.
Knob Parameter Adjustment
1 Position H Move in horizontal direction –200.00 to +200.00
2 Position V Move in vertical direction
a) See page 242.
The surroundings of the moved image on the screen are filled with black.
To return the image moved by the reposition function to the center
position, in the <Reposition> group press [Center].
Setting values
a)
a)
–200.00 to +200.00