Sony MVS-8000X System User Manual page 58

8 Effect execution direction selection buttons
0 EFF LOOP button
a EDIT ENBL (edit enable) button
Press this button, turning it on, to enable
effect editing operations with the keyframe
control block.
When macro editing is carried out, this
button lights red.
b Edit point specification buttons
GO TO KF/TC (Go to keyframe/
timecode): Press this button, turning it
on, to enter a numeric value from the
numeric keypad control block, and
move the edit point to the specified
keyframe.
58
Names and Functions of Parts of the Control Panel
9 STOP NEXT KF button
1 EDIT ENBL button
4 Duration setting buttons
3 Editing buttons
7 Effect execution section
5 KF LOOP button
6 PAUSE button
qa RUN CTRL button
2 Edit point specification buttons
To move the edit point to the specified
timecode position, hold down the
[SHIFT] button in the device control
block, then press this button, turning it
on, and enter the desired numeric value
from the numeric keypad control block.
During macro editing, pressing this
button moves the edit point to the event
number specified by numeric entry
with the numeric keypad control block.
PREV KF (previous keyframe): When
this button is pressed, the edit point
moves to the keyframe immediately
before the current time (the position
where the effect is currently stopped).