Video Processing - Sony MVS-8000X System User Manual

Using the blink function
For example, to make the required settings for key 1 on the M/E-1 bank, use
the following procedure.
1
2
3

Video Processing

You can adjust the luminance and hue of the selected key fill signal.
For example, to apply video processing to the signal selected on the M/E-1
bank key 1 fill bus, use the following procedure.
1
2
3
192
Key Setting Operations Using Menus
In the M/E-1 >Key1 menu, select HF6 'Transition.'
The Transition menu appears.
In the <Blink> group, select [Key Blink] or [Edge Blink] to set it on.
Set the blink parameters.
• When key blink is selected
Knob Parameter Adjustment
1 Blink Rate Length of blink cycle
2 Duty Proportion of cycle for which key
inserted
• When edge blink is selected
Knob Parameter Adjustment
1 Blink Rate Length of blink cycle
2 Duty Proportion of cycle for which
original state holds
In the M/E-1 >Key1 menu, select HF7 'Video Process.'
The Video Process menu appears.
Press [Video Process], turning it on.
Adjust the following parameters.
Knob Parameter Adjustment
1 Video Gain Video gain
2 Y Gain Luminance gain
Setting values
1 to 100
0.00 to 100.00
Setting values
1 to 100
0.00 to 100.00
Setting values
–200.00 to +200.00
–200.00 to +200.00