Canon imageprograf ipf700 Service Manual page 97

d. Right upper cover
To detach the right upper cover[1], first open the top cover, remove the operation panel, right cover lid and
right side cover, and then unscrew the front-panel screws[2]. Next, pull the right side of the right upper cover
to front and slide it down out of position by lifting up the upper left edge of the cover.
Take maximum care in reinstalling the right upper cover not to interfere with the harnesses connected to the
operation panel.
e. Ink tank cover
To detach the ink tank cover[1], remove the right side cover, right upper cover and ink tank cover lid and
unscrew the front-panel screws[2]. Next, detach the right cover by lifting it up as a whole.
F-4-9
2
1
[1]
1
F-4-10
Chapter 4
[1]
[2]
[2]
4-7