Canon imageprograf ipf700 Service Manual page 177

Display Description
TMP Ambient temperature
SIZE LF Detected size of loaded media (feed direction)
0 is always detected for the roll media.
SIZE CR Detected size of loaded media (carriage direction)
(3) HEAD
Displays the following EEPROM information in the printhead.
(4) INK
Displays the numbers of days passed since installation of the following ink tanks.
If any ink tank that does not allow the printer to count the number of days passed is installed,an error message
is displayed.
Displa
y
BK
MBK Number of days passed since the MBK ink tank was
MBK
2
C
M
Y
(5) WARNING
Displays the warning history(up to 20 events). The newest event has the smallest history number.
(6) ERROR
Displays the error history(up to 20 events). The newest event has the smallest history number.
(7) INK CHECK
Displays the history of execution of "Ink Check Off" in the Main menu in the order of C,M,Y,MBK,MBK,and
BK from in this order.
0:No execution
1:Executed at least once
b. I/O DISPLAY(*To be supported by the next version)
Shows the statuses and sensors and switches on the display.
ON=1
Displa Description
y
S/N Serial number of printhead
LOT Lot number of printhead
Description
Number of days passed since the BK ink tank was
installed
installed
Number of days passed since the MBK2 ink tank was
installed
Number of days passed since the C ink tank was installed Day(s)
Number of days passed since the M ink tank was
installed
Number of days passed since the Y ink tank was installed Day(s)
T-7-2
T-7-3
Chapter 7
Unit
C
mm/inch
mm/inch
Unit
Day(s)
Day(s)
Day(s)
Day(s)
7-7