Canon imageprograf ipf700 Service Manual page 180

Chapter 7
-NOZZlE CHK POS.
This mode allows you to adjust the optical axis of the head management sensor. For details,refer to
"Disassembly/Adjustment" > "Adjustment and Setup" > "Action to Take after Replacing the Head Management
Sensor".
-GAP CLIB.
This mode measures the gap between the head and media using a multi sensor and updates the calibration value.
-SENSOR CALIB.
This mode adjusts the sensor for color calibration. Use a dedicated test chart.
-CHANGE LF TYPE
This mode allows you to change the LF roller type.
0:Old roller
1:New roller
d. REPLACE
Used when replacing the cutter unit.For details,refer to "Disassembly/Adjustment" > "Adjustment and Setup"
> "Precautions for Disassembly/Adjustment" > "Cutter".
e. FUNCTION
Checks the operation of the buttons on the operation panel and printer parts.
Display
PANEL LED/LCD This checks the LEDs and LCD on the operation panel. The LEDs flash,and
PANEL KEY
PLATEN FAN
AIR FLOW FAN R This checks the operation of the mist fan R.The mist fan R rotates for 10
AIR FLOW FAN L This checks the operation of the mist fan L.The mist fan L rotates for 10
INK VALVE
7-10
Description
the squares in the LCD are displayd in a checkerboard pattern and flash
altenately. This mode is automatically canceled after completion of the
operation.
This checks the buttons on the operation panel.
The name and symbol of the pressed button is displayed.Pressing the []key
allows you to exit this mode. Also,pressing the [Power]button turns off the
printer.
This checks the operation of the suction fan.
The suction fan rotates for 5 seconds at the maximum speed,and then
rotates for 5 seconds at the minimum speed.
seconds.
seconds.
This checks the operation of the ink valve. The valve motor is driven,and the ink
supply valve open/close cam by one turn.
T-7-8