Chapter 4
4.4 Applying the Grease
4.4.1 Applying The Grease
Apply the grease at the location shown below.
Smear the grease lightly and evenly with a flat brush.
Don't apply the grease to locations other than those designated. Unwanted grease may cause poor print quality,
take particular care that grease does not get onto the wiper, cap, or the linear scale.
Lock pin :
Permalub G No.2 approx. 12mg
4-28
Plate spring : Permalub G No.2
approx. 12mg
Joint :
Molykote PG-641 approx. 24mg
F-4-39
F-4-40
Cam : Permalub G No.2
approx. 12mg
Permalube G No.2
approx. 24mg
0013-9975