Canon imageprograf ipf700 Service Manual page 179

Displa
y
positi
on
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
c. ADJUST
Performs adjustments and prints the adjustment and check patterns neccessary for adjusting the printer parts.
-PRINT PATTERN > NOZZLE 1
1.This nozzle check pattern is used during servicing and is printed in the single direction using a single path. It
is used to check for nozzles that are not injecting ink properly.
This pattern is printed on A4-size media in the landscape orientation.
The media type is optional.
-PRINT PATTERN > OPTICAL AXIS
This pattern is used to adjust the registration sensor oprical axis. For details,refer to "Disassembly/Adjustment"
> "Adjustment and Setup" > "Action to Take after Replacing the Carriage Unit or Multi Sensor".
Use photo glossy paper.
-PRINT PATTERN > LF TUNING
This pattern is used to adjust the cassette feed roller eccentricity. For details,refer to "Disassembly/Adjustment"
> "Adjustment and Setup" > "Action to Take after Replacing the Cassette Feed Roller HP Sensor or Cassette
Feed Roller Encoder".
Use photo glossy paper.
-HEAD ADJ.
This mode allows you to set of reset the registration adjustment values of individual heads.
Display
MANUAL HEAD
ADJ
ADJ. SETTING
RESET SETTING
Sensor name
(Not Used)
Roll Media Sensor
Roll Cam Sensor
(Not Used)
(Not Used)
(Not Used)
(Not Used)
(Not Used)
(Not Used)
(Not Used)
Roll unit detection
Cutter unit detection
(Not Used)
(Not Used)
(Not Used)
(Not Used)
(Not Used)
Description
Prints the manual head adjustment pattern.
DETAIL:Fine adjustment
BASIC:Simple adjustment
Allows you to enter any registration adjustment value within the
range of-127-to+127.
Resets the registration adjustment values.
Adjustment values A1 to F* are reset(to zeros).
LCD display contents
-
0:Sensor ON ,1:Sensor OFF
0:Sensor ON ,1:Sensor OFF
-
-
-
-
-
-
-
0:Roll unit not detected, 1:Roll unit detected
0:Cutter unit no detected, 1:Cutter unit detected
-
-
-
-
-
T-7-7
Chapter 7
7-9